Model Number: 316 stainless steel fermentor li
Brand Name: Sidolim
Key Specifications/Special Features:
SpecificationsThe SiDoLim in situ sterilizable fermentor (SDP 50L-100L) system is a lab scale fermentor and designed for ease of useFermentor SDP 50L-100LThe fermentorSDP(50L-100L) is the pilot-scale fermentation system and which can be used for microbial, insect and mammalian cell culture proceduresThe stainless steel (SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in this pilot scale fermentation system and the whole fermentation process can be also performed automaticallyFermentor SDP (50L-100L) is able to install head lifting system
The head plate is lifted by air cylinder and guided by the two sets of linear motion guide
Control system
Vessel
The head plate is lifted by air cylinder and guided by the two sets of linear motion guide
- Fed-batch culture support pH Stat, DO Stat
- Color LCD integrated microprocessor controller system
- Validation support documentation available (IQ, OQ)
- Data saving
- Fermentor system represents the ideal intermediate step for scaling up
- Automatic control of DO, pH, temperature, agitation, and nutrient feed for fermentation process
- All processing parameter are controlled by integrated microprocessor controller
- Automate or manual sterilization in place by external steam supply or optional steam generator
- The modular design consists of the supply unit the culture vessel and the control cabinet
- The open frame design of the supply unit provides ready access and ease of maintenance and operation
- The sterilization procedures are programmable and can be modified by users
- Accessories for cell culture applications are available upon request
Control system
- The integrated controller board is adopted to measure, control and display the fermentation system
- Color LCD displays the whole status of the system in graphic mode
- The measured data and control parameters can be not only saved and transmitted to the computer in Excel format but also printed out by thermal printer in real time state
- Easy to connect with the various systems such as memory stick, printer, computer with the RS-232C communication protocol
Vessel
- Water jacket system is adopted for precise temperature control
- 6-8 toggle bolts make it easy to assemble and dissemble the head plate
- Sight glass makes to monitor the status of the media
- Spare ports are installed on the head plate that the auxiliary sensor can be installed
- Sensor ports are installed in the circumferential direction on the lower side of the vessel
- 220V 50/60Hz, single phase
- pH, DO, pressure, temperature and agitation speed
Agitation | Drive | DC motor, AC gear motor, top drive (mechanical seal driving) |
Range | 50~1000rpm 1rpm | |
Impellers | Turbine impeller (SUS316L) foam breaker (SUS316L) | |
Sensor | Magnetic Hall sensor | |
Control | Microprocessor based PID | |
Materials & Finish | Vessel | Using 316L stainless steel it is polished mechanically or electrically |
Piping | 316L stainless steel prevent contamination and is polished by electrically | |
O-rings/gaskets | Viton or silicon material is used for the O-ring and the EPDM is used for gasket | |
Sterilization | Built-in heater makers the in-situ sterilization for the vessel, head plate, filter, aeration pipe lines in 105 ~130 temperature range automatically | |
Temperature | Range( ) | From 3 above the cooling water temperature to 80 (accuracy 0.1 ) |
Sensor | RTD(Pt-100) | |
Control | The built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket | |
Aeration | Sparger | Ring sparger (SUS 316L) |
Intel filter | The cartridge type sterilizable pleated type 0.2μm absolute filter specifications(option item) | |
Out filter | The same as internal filter specification(option item) | |
Control range | Different vessel size and/or ordered specifications | |
Pressure Control | The back pressure is controlled manually or automatically | |
Control unit | Panel | 8.5" graphic color LCD, membrane keypad |
Communications | Memory stick, printer, computer with the RS-232C communications protocol. | |
Controller board | MC68EC020 microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe